|
|
Using their own patented (US Patent Number 4,017,373) electrochemical voltammetric sensors, Interscan offers instruments for Br2, CO, Cl2, ClO2, C2H4, ethylene oxide, HCHO, H2, Hydrazine, HBr, HCl, HCN, H2S, NO, NO2, O3, propylene oxide, and SO2. Available measuring ranges, in all cases, provide sufficient sensitivity to operate well below the applicable occupational health levels, and, at the other end, allow readings in excess of 1000 ppm.
Applications:
-
Hydrazine/hypergols (Rocket Fuel) - for NASA/aerospace/military; measure hydrzine in boiler feed water for power industry
-
Ethylene oxide (EtO) as sterilant for hospitals for instruments requiring low heat sterilization
-
Hydrogen Peroxide (H202) - measuring peroxide as sterilant for health care and for bio-decontamination.
-
Formaldehyde (HCHO) - measure formaldehyde as used in pharmeceutical industry, manufactured wood products, chemical plants, and paper manufacture
Sensors are available for:
Interscan sensors are available for bromine, carbon monoxide, chlorine, chlorine dioxide, ethylene, ethylene oxide, formaldehyde, hydrazine(s), hydrogen, hydrogen bromide, hydrogen chloride, hydrogen cyanide, hydrogen peroxide, hydrogen sulfide, nitric oxide, nitrogen dioxide, ozone, propylene oxide, and sulfur dioxide. Download brochure.
|
|
4000 Series Portable Analyzer
- An integral sample pump, powered by rechargeable Ni-Cd batteries (supplied), giving up to 10 hours of continuous service
- Digital readout of concentration in real time
- Audible and visual alarm
- Nylon/Cordura carrying case
- Plug-in "calculator-type" battery charger
- UL Classified Intrinsically Safe Models for use in hazardous locations, Class I, Groups A, B, C, and D (10X0), are available. Analog output (0-100 mV full scale)
- CE Approved models available.
- Options include: digital panel meter, special ranges, Analog output to 0-110mV f.s., Power and signal input to recorder via mating connector
-
Download brochure.
|
|
Single point:
Double point:
|
Single Point and Two Point Continuous Monitoring Systems - LD Series
Interscan's LD Series offers the ultimate in continuous monitoring systems. Every component has been chosen based on years of experience in some of the most demanding environments imaginable. What's more, the units are easy and inexpensive to maintain. An impressive array of options allows the specifier to put together a system ideally suited to the application at hand. Features:
-
Super-rugged NEMA Type 4X fiberglass reinforced polyester enclosure for single point unit; NEMA type 12 steel enclosure for two point unit
-
3 1/2- digit LED display/controller
-
Integral diaphragm pump
-
Rotameter
-
Analog output
-
Low and high alarm contacts, continuously adjustable through the full scale measuring range, activating dedicated relays
-
Alternative packaging, including Type X or Type Z purged enclosures, explosion-proof enclosures, and RFI resistant enclosures
-
Audible alarm
- Visual Alarm
-
Enclosure heating and cooling
-
Loss of sample flow alarm
-
Triple alarm set points
-
Loss of power alarm
-
Aspirator (in lieu of pump)
-
Auto zero
- Sensor protection circuit
-
Download brochure.
|
