|
Dynamic Range:
|
0 to 1000 ppmv at 100 mL/min sample flow through cell at 25ºC and 101.4 kPa (0-2000 ppmv range possible with reduced sample flow
|
|
Sensitivity:
|
0.1 ppmv
|
|
Accuracy:
|
+0.5 ppm or +5.0% of the display reading, whichever is greater
|
|
Response Time:
|
63% response to a stepwise change in either direction between 50 ppm and 1000 ppm will occur in 30 seconds or less
|
|
Utility Requirements:
|
100 to 130 VAC or 200 to 260 VAC and optional 12 to 14 VDC operation, 20W maximum
|
|
Analog Output:
|
4-to-20 mA DC proportional to range selected, compatible with 625-ohm maximum load
|
|
Alarms:
|
Rated for 1 A, 24 VDc, normally open and normally closed contacts; user-settable to fail-safe or low-power operation
|
|
Sample Temperatures:
|
up to 52ºC (125ºF)
|
|
Ambient Temperature:
|
0º to 52ºC (32º to 125ºF)
|
|
Temperature Stability:
|
0.5% per ºC of selected range
|
|
Sample Pressure:
|
69 to 690 kPa (10 to 100 psi) gauge
|
|
|
|
|
|
MECHANICAL SPECIFICATIONS
|
|
Electrolyte Cell:
|
The electrolyte sensor is in a self contained assembly for quick and easy replacement
|
|
Front Panel Controls:
|
Analog ranges 0 to 10, 100, 1000, and 2000 ppm; 0 to 0.5, 5, 50, 100 lb/mmscf
|
|
|
-Display light
|
|
|
-Alarm
|
|
|
-Standby power
|
|
|
-Electrical test
|
|
|
-Cell test
|
|
|
-Power
|
|
|
-Sample and by-pass flow adjust
|
|
External Connectors:
|
Gas IN and OUT fittings for 1/8 inch OD tubing. Internal connections for output and alarms; relay jumper changes operation to failsafe mode
|
|
Materials of Construction:
|
Sample comes in contact with P2O5 stainless steel, TEFLON® fluorocarbon resin, gless, platinum, and Viton
|
|
Weight:
|
6.4kg (14 lb)
|
|
Cabinet Dimensions (LxWxH):
|
34.3 x 23.5 x 12.7 cm (13.5 x 9.25 x 5.0 in)
|
