|
Perma Pure LLC- The leader in Gas Conditioning
|
|
|
Perma Pure Baldwin Thermo-Electric Coolers
|
|
|
Classic Cooler
The Baldwin™-Series Classic thermo-electric coolers by Perma Pure offer a history of reliable performance
for high flow rate, high ambient temperature, and high water volume applications. All Baldwin-Series coolers
use thermo-electric elements (Peltiers) to cool the sample gas to the desired dew point temperature.
Condensate is removed as it forms by a small peristaltic pump. Alarm relays protect analyzers
Download brochures:
Classic Cooler - Model 610P - Classic M115 - Classic M325 - Classic M425 - Classic 5210 - Classic
8210 - Classic 20410
|
|
|
eCool
- Remote control and monitoring of probe, sample line and cooler
- Digital control via custom windows application over a network or Modbus over TCP/IP
- CSA Rated Class I, Division II models available - e5500XP, e5800XP, e5900XP
- CE Rated
|
|
|
SO3 Removal System
The Perma Pure Baldwin-Series Aerosol removal system is specifically designed for gas sample applications with relatively high SO3 content (>10ppm). The SO3 aerosol removal series has special timing circuits that alternate freeze and thaw the precisely packed heat exchangers. Before an active heat exchanger thaws, the alternate active heat exchanger reaches the -7C set point to ensure uninterrupted operation and no SO3 slippage. This sub zero temperature forms
a thin ice layer that captures and removes SO3 aerosol from the sample stream. Download brochure.
|
|
Model l0410
|
|
Common Industry Applications
|
Coal Combustion, Glass Furnaces, Refineries
|
|
Standard Sample Gas Flow Rate
|
1-5 LPM
|
|
Number of Impingers
|
2 - Glass 10"
2 - Packed Kynar 10"
|
|
Dimensions
|
14.5 x 12.75 x 12.25" HWD
|
|
Weight
|
36 lbs.
|
|
|
|
SDS-Supplemental Drying System "Cooler Booster"
Filters, Scrubbers & More SDS™-Series drying systems provide a boost to an existing gas sample
conditioning system. The SDS will reduce the dew point of the sample from +4°C down to below –15°C, reducing the total moisture content by an additional 80%. Lowering the gas sample dew point is essential in order to eliminate the formation of acid mists. Rather than replace an existing cooler with a “super” cooler, the SDS is a cost effective way of extending the life and improving the performance of your existing sample conditioning
system.The SDS can process one stream of up to 10 lpm, or two streams of up to 5 lpm each. Download brochure.
- Eliminates formation of acid mists
- Selective Nafion® membrane technology
- Single or dual sample streams
- Improves chiller performance
- Corrosion resistant
- Improves sensitivity of IR measurements
|
|
Permapure Main Page - Dryers - Sample Conditioning Systems - Baldwin Direct Extractive Filter Probes - Filters, Scrubbers, and Accessories - Humidifiers
|
